100% PURE POLYUREA MEMBRANE FOR WATERPROOFING AND COATING - Koralsystem

  1. >100% PURE POLYUREA MEMBRANE FOR WATERPROOFING AND COATING

CP-2049

100% PURE POLYUREA MEMBRANE FOR WATERPROOFING AND COATING

The 100% pure polyurea TECNOCOAT P-2049 system was developed as a two-component, sprayable, aromatic coating suitable for waterproofing.

Size
uses
100% PURE POLYUREA MEMBRANE FOR WATERPROOFING AND COATING

For waterproofing and protection of:

  • ROOFING: Sloped and flat roofs (walkables), balconies and overhangs.(ETA 11/0357 "Liquid Applied Roof Waterproofing Kit, based on pure Polyurea" and BBA 16/5340)
  • FLOORING: Car parks with heavy traffic, industrial floor surfaces with waterproofing and hard-wearing requirements (according EN 1504.2); including an approved non-slip finish (ENV-12633:2003)
  • BRIDGE DECK: coating under asphal on concrete elements of civil engineering (ETE 16/0680 "Liquid Applied Bridge Deck Waterproofing based on pure polyurea")
  • Tanks and irrigation canals, potable water contact (according BS-6920)
  • Retaining walls and foundations (EN 1504.2 "Products & systems for protection/repair of concrete structures")
  • Green roofs and walls (ETA 11/0357 Liquid Applied Roof Waterproofing Kit,  and BBA 16/5340)
  • Power plants, recycling, waterwaste, water treatment and petrochemical plants (EN-1504.2)
  • Swimming pools, aquariums, lakes. Near sea water
  • Vehicle and boat coatings(bed liners)
  • Asbestos roofs rehabilitation (use with TECNOFOAM SPF)
  • As a protection for a SPF ( spray polyurethane foam TECNOFOAM G-2050)

NOTE: call our technical department about the application to other supports or situations